The WILKA 138F Lever Operated Euro Profile Latch Only Mortice Lock has 92mm centres, 25mm or 30mm or 35mm or 40mm or 45mm backset and has 24mm faceplate width. It is suitable for metal frame doors, is EN12209 certified and has a fully galvanised case. HandingThe latch can be reversed by pushing up the latch hold cam (located on the side of the lockcase) with a flat bladed screwdriver. Remove the latch, reverse it, and return it to the case. You should hear a click as it engages. OperationLocking Method – Latch 1. The latchbolt is operated by the handle.

The WILKA 138F Lever Operated Euro Profile Latch Only Mortice Lock has 92mm centres, 25mm or 30mm or 35mm or 40mm or 45mm backset and has 24mm faceplate width. It is suitable for metal frame doors, is EN12209 certified and has a fully galvanised case. HandingThe latch can be reversed by pushing up the latch hold cam (located on the side of the lockcase) with a flat bladed screwdriver. Remove the latch, reverse it, and return it to the case. You should hear a click as it engages. OperationLocking Method – Latch 1. The latchbolt is operated by the handle.

The WILKA 138R Lever Operated Deadbolt Only Mortice Deadlock has 92mm centres, 25mm or 30mm or 35mm or 40mm or 45mm backset and has 24mm faceplate width. It is suitable for metal frame doors, is EN12209 certified and has a fully galvanised case. HandingNot applicable. OperationLocking Method – Dead 1. Standard deadlock operation with the deadbolt operated by the cylinder.

The WILKA 138R Lever Operated Deadbolt Only Mortice Deadlock has 92mm centres, 25mm or 30mm or 35mm or 40mm or 45mm backset and has 24mm faceplate width. It is suitable for metal frame doors, is EN12209 certified and has a fully galvanised case. HandingNot applicable. OperationLocking Method – Dead 1. Standard deadlock operation with the deadbolt operated by the cylinder.

The WILKA 1433 Lever Operated Latch & Deadbolt Mortice Sashlock has 92mm centres, 20mm backset and has 24mm faceplate width. It is suitable for use on metal frame doors, is EN12209 certified, has a 15mm bolt throw and is fully zinc plated. HandingThe latch can be reversed by pushing up the latch hold cam (located on the side of the lockcase) with a flat bladed screwdriver. Remove the latch, reverse it, and return it to the case. You should hear a click as it engages. OperationLocking Method – Sash 2. Standard sashlock operation with the deadbolt operated by the cylinder and the latchbolt operated by the handle or cylinder.