A smart and convenient way to store and carry a comprehensive range of Yale Doormaster replacement gearboxes, included in the kit are the following:-• 1x GU Old style 35/92 Latch and Deadbolt gearbox with single spindle (L18761)• 1x Lockmaster 35/92 Latch and Deadbolt gearbox with dual spindle (L18756)•1x Lockmaster 35/92 Latch and Hookbolt gearbox with dual spindle (L18755)•1x Lockmaster 45/92 Latch and Deadbolt gearbox with dual spindle (L18757)• 1x Lockmaster 35/92 Latch and Deadbolt gearbox with single spindle (L18758)• 1x Lockmaster 45/92 Latch and Deadbolt gearbox with single spindle (L18759)• 1x Mila old style 35/92 Latch and Deadbolt gearbox with spindle (L18762)• 1x Yale G2000 35/92 Latch and Hookbolt gearbox with double spindle (L18760)• 1x Yale YS170 35/92 Overnight Lock with dual spindle (L21819)• 1x Overnight Lock and Keep (L18751)• 1x Torx Driver

The YALE Doormaster Lever Operated Latch & Deadbolt Single Spindle Gearbox To Suit GU has 35mm backset, latch & deadbolt centre case, 92mm centres, 50mm case width and has 207mm case height. This gearbox is designed to suit old style GU multipoint locks with lever operated latch and deadbolt operation. It offers a direct retrofit option for repair jobs where the existing full length strip is still serviceable. HandingThe latch can be reversed by removing the faceplate, reversing the latch, and then refitting the faceplate. OperationLocking Method – A. Lift lever to engage locking mechanisms and then one full turn of the cylinder to lock. One full turn of the key, then push down on the lever to unlock.

The YALE Doormaster Lever Operated Latch & Hookbolt Twin Spindle Gearbox To Suit Lockmaster has 35mm backset, latch & hookbolt centre case, 92mm & 62mm centres, 47mm case width and has 228mm case height. To suit style Yale Lockmaster cases, it offers a cost effective solution for repairing or refurbishing existing door systems without needing to replace the entire strip. This is the new version with the round hole push to snib feature. If the centre case is being used for a replacement with a snib handle, the handle spindle will still pass through the round hole but will not be needed to activate the snib. You simply push the latch head in. IdentificationPlease note that this case is very similar in appearance to the Safeware version and is often mistaken for it. However, the Lockmaster case has a height of 228mm, whereas the Safeware case measures 255mm. HandingThe latch can be reversed by removing the screw in the latch, taking the latch out, flipping it to the opposite hand, and refitting the screw. OperationLocking Method – A. Lift lever to engage locking mechanisms and then one full turn of the cylinder to lock. One full turn of the key, then push down on the lever to unlock.

The YALE YS170 Lever Operated Latch & Hookbolt Split Spindle Gearbox has 35mm backset, 92mm centres and has 50mm case width. It is designed to suit Yale and Yale Doormaster products and is ideal for lever pad or lever lever handle arrangements, providing a direct replacement without needing to change the full locking strip. HandingThe latch can be reversed by removing the screw in the latch, taking the latch out, flipping it to the opposite hand, and refitting the screw. OperationLocking Method – A. Lift lever to engage locking mechanisms and then one full turn of the cylinder to lock. One full turn of the key, then push down on the lever to unlock.