The AVANTIS Lever Operated Twin Spindle Latch & Deadbolt with 2 Hooks features a 35mm backset, 92mm and 62mm centres, a 220mm case height, a 53mm case width, twin spindle operation and a latch & deadbolt centre case.Avantis door locks feature some of the largest hooks and bolts on the market at 25mm, designed to provide excellent security and compression.IdentificationCan be identified by the ribbed deadbolt and extra large 25mm hooks.GearboxThe latch & deadbolt gearbox has a twin spindle, a case height of 220mm and a case width of 53mm.Additional Locking PointsIn addition to the locking points within the gearbox, the full length strip has 2 hook locking points.FaceplateThe 16mm wide faceplate is ideal for use on UPVC and composite applications and is 2.2m long.Locking Point DistancesLocking Point Distance A = 650mmLocking Point Distance B = 650mmCroppableThis full length unit is croppable, allowing the strip height to be reduced to suit the door it is being installed into.HandingThe latch can be reversed by removing the screw in the latch, taking the latch out, turning it to the opposite hand and refitting the screw.Sprung/UnsprungThe gearbox is unsprung and must be installed with sprung handles and/or a compatible spring cassette to ensure correct operation and reliable lever return.OperationLocking Method A. Lift the lever to engage the locking mechanisms, then use one full turn of the cylinder to lock. To unlock, use one full turn of the key, then push down on the lever.

The AVANTIS Lever Operated Twin Spindle Latch & Deadbolt – 2 Hook 2 Roller has 35mm backset, 92mm & 62mm centres, 220mm case height, 53mm case width, is twin spindle and has a latch & deadbolt centre case. Avantis door locks have the largest hook and bolts on the market at 25mm and are designed to provide both ultimate security & compression. IdentificationCan be identified by the ribbed deabolt and extra large 25mm hooks. GearboxThe latch & deadbolt gearbox has a twin spindle, a case height of 220mm and a case width of 53mm. Additional Locking PointsIn addition to the locking points within the gearbox, the full length strip has 2 hook and 2 roller locking points. Faceplate16mm wide faceplate, ideal for use on UPVC & composite applications and is 1.995m or 2.2m long. Locking Point DistancesLocking Point Distance A = 550mm or 650mmLocking Point Distance B = 550mm or 650mmLocking Point Distance C = 668mm or 768mmLocking Point Distance D = 668mm or 768mmCroppableThis full length unit is croppable to allow the strip height to be reduced to suit the door it is being installed into. HandingThe latch can be reversed by removing the screw in the latch, taking the latch out, flipping it to the opposite hand, and refitting the screw. Spung/UnsprungThe gearbox is unsprung and must be installed with sprung handles and or a compatible spring cassette to ensure correct operation and reliable lever return. OperationLocking Method – A. Lift lever to engage locking mechanisms and then one full turn of the cylinder to lock. One full turn of the key then push down on the lever to unlock.

The AVANTIS Lever Operated Twin Spindle Latch & Deadbolt – 2 Hook Large has 45mm backset, 92mm & 62mm centres, 220mm case height, 63mm case width, is twin spindle and has a latch & deadbolt centre case. Avantis door locks have the largest hook and bolts on the market at 25mm and are designed to provide both ultimate security & compression. IdentificationCan be identified by the ribbed deabolt and extra large 25mm hooks. GearboxThe latch & deadbolt gearbox has a twin spindle, a case height of 220mm and a case width of 63mm. Additional Locking PointsIn addition to the locking points within the gearbox, the full length strip has 2 hook locking points. Faceplate16mm or 20mm wide faceplate, ideal for use on UPVC & composite applications and is 1.78m or 2.2m long. Locking Point DistancesLocking Point Distance A = 750mmLocking Point Distance B = 750mmHandingThe latch can be reversed by removing the screw in the latch, taking the latch out, flipping it to the opposite hand, and refitting the screw. Spung/UnsprungThe gearbox is unsprung and must be installed with sprung handles and or a compatible spring cassette to ensure correct operation and reliable lever return. OperationLocking Method – A. Lift lever to engage locking mechanisms and then one full turn of the cylinder to lock. One full turn of the key then push down on the lever to unlock.