The Avocet Affinity Bastion Lever Operated Latch & Deadbolt Twin Spindle – 4 Hook has 35mm or 45mm backset, 92mm & 62mm centres, 220mm case height, 50mm or 60mm case width, is twin spindle and has a latch & deadbolt centre case. It has a 20mm trivalent finish faceplate with radiused ends making it ideally suited for use on timber & composite doors and is fitted with 4 opposing hooks for maximum resistance to lifting attack. It has twin spindles meaning that it can be used as either a straight forward lever/lever operation (using just the 92mm spindle) or as a split spindle (lever/pad) operation when using both the 92mm and 62mm spindles. There is a 16mm throw on the deadbolt, a 24mm throw on the hook bolts and the latch is both sprung loaded and reversible. This locking mechanism has been endurance tested to 100,000 operations and complies with BS EN 1670 Class 5 and is tested to PAS24. AccreditationThese products comply to PAS24 & have corrosion resistance to EN1670: Grade 5. IdentificationUsually has “AVOCET” stamped on the faceplate, has double hook locking points (2 hooks in close proximity) and the center case has a large cut out step in the top corner. GearboxThe latch & deadbolt gearbox has a twin spindle, a case height of 220mm and a case width of 50mm or 60mm. Additional Locking PointsIn addition to the locking points within the gearbox, the full length strip has 4 hook locking points. Faceplate20mm wide radius faceplate, ideal for use on UPVC & composite applications and is 1.77m long. Locking Point DistancesLocking Point Distance A = 754mmLocking Point Distance B = 755mmLocking Point Distance C = 789mmLocking Point Distance D = 790mmCroppableThis unit cannot be cropped down on site, please check the required unit length before purchasing. HandingThe latch can be reversed by removing the screw in the latch, taking the latch out, flipping it to the opposite hand, and refitting the screw. Spung/UnsprungThe gearbox is unsprung and must be installed with sprung handles and / or a compatible spring cassette to ensure correct operation and reliable lever return. OperationLocking Method – A. Lift lever to engage locking mechanisms and then one full turn of the cylinder to lock. One full turn of the key then push down on the lever to unlock.

The Avocet Affinity Bastion Lever Operated Latch & Deadbolt Twin Spindle – 4 Hook has 35mm or 45mm backset, 92mm & 62mm centres, 220mm case height, 50mm or 60mm case width, is twin spindle and has a latch & deadbolt centre case. It has a 20mm trivalent finish faceplate with radiused ends making it ideally suited for use on timber & composite doors and is fitted with 4 opposing hooks for maximum resistance to lifting attack. It has twin spindles meaning that it can be used as either a straight forward lever/lever operation (using just the 92mm spindle) or as a split spindle (lever/pad) operation when using both the 92mm and 62mm spindles. There is a 16mm throw on the deadbolt, a 24mm throw on the hook bolts and the latch is both sprung loaded and reversible. This locking mechanism has been endurance tested to 100,000 operations and complies with BS EN 1670 Class 5 and is tested to PAS24. AccreditationThese products comply to PAS24 & have corrosion resistance to EN1670: Grade 5. IdentificationUsually has “AVOCET” stamped on the faceplate, has double hook locking points (2 hooks in close proximity) and the center case has a large cut out step in the top corner. GearboxThe latch & deadbolt gearbox has a twin spindle, a case height of 220mm and a case width of 50mm or 60mm. Additional Locking PointsIn addition to the locking points within the gearbox, the full length strip has 4 hook locking points. Faceplate20mm wide radius faceplate, ideal for use on UPVC & composite applications and is 1.77m long. Locking Point DistancesLocking Point Distance A = 754mmLocking Point Distance B = 755mmLocking Point Distance C = 789mmLocking Point Distance D = 790mmCroppableThis unit cannot be cropped down on site, please check the required unit length before purchasing. HandingThe latch can be reversed by removing the screw in the latch, taking the latch out, flipping it to the opposite hand, and refitting the screw. Spung/UnsprungThe gearbox is unsprung and must be installed with sprung handles and / or a compatible spring cassette to ensure correct operation and reliable lever return. OperationLocking Method – A. Lift lever to engage locking mechanisms and then one full turn of the cylinder to lock. One full turn of the key then push down on the lever to unlock.

The AVOCET Lever Operated Latch & Deadbolt Twin Spindle – 4 Roller has 35mm backset, 92mm & 62mm centres, 220mm case height, 50mm case width, is twin spindle and has a latch & deadbolt centre case. IdentificationUsually has “AVOCET” or “WMS” stamped on the faceplate and the center case has a large cut out step in the top corner. GearboxThe latch & deadbolt gearbox has a twin spindle, a case height of 220mm and a case width of 50mm. Additional Locking PointsIn addition to the locking points within the gearbox, the full length strip has 4 roller locking points. Faceplate16mm wide faceplate, ideal for use on UPVC & composite applications and is 2.2m long. Locking Point DistancesLocking Point Distance A = 168mmLocking Point Distance B = 215mmLocking Point Distance C = 761mmLocking Point Distance D = 811mmCroppableThis full length unit is croppable to allow the strip height to be reduced to suit the door it is being installed into. HandingThe latch can be reversed by removing the screw in the latch, taking the latch out, flipping it to the opposite hand, and refitting the screw. Spung/UnsprungThe gearbox is unsprung and must be installed with sprung handles and / or a compatible spring cassette to ensure correct operation and reliable lever return. OperationLocking Method – A. Lift lever to engage locking mechanisms and then one full turn of the cylinder to lock. One full turn of the key then push down on the lever to unlock.

The AVOCET Pioneer Caravan Lock Latch & Deadbolt With 2 Deadbolt has 35mm backset, 92mm centres, 220mm case height, 50mm case width, is twin spindle and has a latch & deadbolt centre case. It has twin spindles meaning that it can be used as either a straight forward lever/lever operation (using just the 92mm spindle) or as a split spindle (lever/pad) operation when using both the 92mm and 62mm spindles. AccreditationThese products have corrosion resistance to EN1670: Grade 4 (240 hours NSS). IdentificationUsually has “AVOCET” stamped on the faceplate, has a short unit length (1,565mm) for use on caravan doors and the center case has a large cut out step in the top corner. GearboxThe latch & deadbolt gearbox has a twin spindle, a case height of 220mm and a case width of 50mm. Additional Locking PointsIn addition to the locking points within the gearbox, the full length strip has 2 dead bolt locking points. Faceplate16mm wide faceplate, ideal for use on UPVC & composite applications and is 1.565m long. Locking Point DistancesLocking Point Distance A = 685mmLocking Point Distance B = 715mmCroppableThis full length unit is croppable to allow the strip height to be reduced to suit the door it is being installed into. HandingThe latch can be reversed by removing the screw in the latch, taking the latch out, flipping it to the opposite hand, and refitting the screw. Spung/UnsprungThe gearbox is unsprung and must be installed with sprung handles and / or a compatible spring cassette to ensure correct operation and reliable lever return. OperationLocking Method – A. Lift lever to engage locking mechanisms and then one full turn of the cylinder to lock. One full turn of the key then push down on the lever to unlock.