Showing 1–16 of 19 results

ELMDENE 12V DC Access Power Supply – 12VDC 4A (To fit 2 ACU’S)

 184.46

This range has been designed by Elmdene to house most common access control door controllers including Paxton and ACT. With different power options and enclosure sizes, this PSU is suitable for a variety of applications. All models offer fault signalling and can charge a 12V standby battery (sold separately) to provide backup power on a mains failure. Multi-fused outputs are provided to allow the installer to protect individual circuits as required. All models possess a mains fail relay output, plus additional Battery Monitoring and Deep Discharge Protection features.

ELMDENE 12V DC Access Power Supply – 12VDC 8A (To fit 4 ACU’S)

 320.69

This range has been designed by Elmdene to house most common access control door controllers including Paxton and ACT. With different power options and enclosure sizes, this PSU is suitable for a variety of applications. All models offer fault signalling and can charge a 12V standby battery (sold separately) to provide backup power on a mains failure. Multi-fused outputs are provided to allow the installer to protect individual circuits as required. All models possess a mains fail relay output, plus additional Battery Monitoring and Deep Discharge Protection features.

ELMDENE 12V DC G Series Switch Mode Power Supply Boxed – 12 VDC 5 Amp

 165.86

The 12V DC G Range of N Series power supplies from Elmdene has been designed for use in CCTV, access control and general purpose applications that require the use of a standby battery. They use energy efficient switch mode technology and have a universal mains supply input (90—264V AC). Elmdene’s FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range includes several power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. This particular model is boxed with a clam lid.

ELMDENE 12V DC G Series Switch Mode Power Supply Boxed – 12VDC 1 Amp

 54.02

The 12V DC G Range of N Series power supplies from Elmdene has been designed for use in CCTV, access control and general purpose applications that require the use of a standby battery. They use energy efficient switch mode technology and have a universal mains supply input (90—264V AC). Elmdene’s FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range includes several power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. This particular model is boxed with a hinged lid.

ELMDENE 12V DC G Series Switch Mode Power Supply Boxed – 12VDC 2 Amp

 83.88

The 12V DC G Range of N Series power supplies from Elmdene has been designed for use in CCTV, access control and general purpose applications that require the use of a standby battery. They use energy efficient switch mode technology and have a universal mains supply input (90—264V AC). Elmdene’s FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range includes several power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. This particular model is boxed with a hinged lid.

ELMDENE 12V DC G Series Switch Mode Power Supply Boxed – 12VDC 3 Amp

 95.89

The 12V DC G Range of N Series power supplies from Elmdene has been designed for use in CCTV, access control and general purpose applications that require the use of a standby battery. They use energy efficient switch mode technology and have a universal mains supply input (90—264V AC). Elmdene’s FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range includes several power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. This particular model is boxed with a hinged lid.

ELMDENE 12V DC G Series Switch Mode Power Supply Boxed – 12VDC 3 Amp – Small

 89.87

The 12V DC G Range of N Series power supplies from Elmdene has been designed for use in CCTV, access control and general purpose applications that require the use of a standby battery. They use energy efficient switch mode technology and have a universal mains supply input (90—264V AC). Elmdene’s FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range includes several power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. This particular model is boxed with a hinged lid.

ELMDENE 12V DC G Series Switch Mode Power Supply Boxed – 12VDC 4 Amp

 109.95

The 12V DC G Range of N Series power supplies from Elmdene has been designed for use in CCTV, access control and general purpose applications that require the use of a standby battery. They use energy efficient switch mode technology and have a universal mains supply input (90—264V AC). Elmdene’s FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range includes several power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. This particular model is boxed with a hinged lid.

ELMDENE 12V DC G Series Switch Mode Power Supply Boxed – 12VDC 5 Amp

 165.87

The 12V DC G Range of N Series power supplies from Elmdene has been designed for use in CCTV, access control and general purpose applications that require the use of a standby battery. They use energy efficient switch mode technology and have a universal mains supply input (90—264V AC). Elmdene’s FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range includes several power variants with full rated current to load and also feature a fully regulated output with low ripple and noise. This particular model is boxed with a hinged lid.

ELMDENE 12V DC G Series Switch Mode Power Supply Unboxed – 12VDC 1 Amp

 34.84

The 12V DC G Range of N Series power supplies from Elmdene has been designed for use in CCTV, access control and general purpose applications that require the use of a standby battery. They use energy efficient switch mode technology and have a universal mains supply input (90—264V AC). Elmdene’s FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range includes several power variants with full rated current to load and also feature a fully regulated putput with low ripple and noise.

ELMDENE 12V DC G Series Switch Mode Power Supply Unboxed – 12VDC 2 Amp

 57.50

The 12V DC G Range of N Series power supplies from Elmdene has been designed for use in CCTV, access control and general purpose applications that require the use of a standby battery. They use energy efficient switch mode technology and have a universal mains supply input (90—264V AC). Elmdene’s FOM4 or FOM8 units can be fitted to give 4 or 8 independent fused outputs if required. The modular range includes several power variants with full rated current to load and also feature a fully regulated putput with low ripple and noise.

ELMDENE Large Roller Shutter Contact Grade 3 – AS-4HD

 13.19

A pre wired Aluminium door contact designed for higher usage areas. It is suitable for use on either timber or metal, single or double doors.

ELMDENE Large Wired Magnetic Contact Grade 3 – AS-4HD-SO

 12.66

A pre wired Aluminium door contact designed for higher usage areas. This contact comes with built in stand off brackets to provide a 12mm stand off.

  • 1
  • 2