Showing all 5 results

SASHMATE Main Tool Package Fitting Tools SMTPS – SMTPS

 2,545.60

The Sashmate Main Tool Package contains the two main fitting tools required for window sashes, the Sashmate top hung steel and side hung steel sets, plus storage/carry bags. The range is constructed from premium quality zinc plated steel and manufactured in the UK. An added bonus of using Sashmate products is that using extra sets on a repair increases the load capabilities of the sets. For example, if 2 Sashmate Top Hung sets are used, this makes double the maximum working load capability.

SASHMATE Telescopic Main Rods Fitting Tools TMRS – TMRS

 236.80

This package of 2 x Sashmate telescopic rod sets are designed to be used instead of standard solid rods allowing the Sashmate® Top Hung to be used with short complete openers of approximately 650mm in height. Rod set 1 = 650mm to 880mm and rod set #2 = 880mm to 1240mm. These telescopic main rods can also be combined with the Sashmate Side Hung to reduce minimum working height to 650mm.

SASHMATE Top Hung Drop Set Fitting Tool THDSS – THDSS

 213.12

The Sashmate Top Hung Drop Set Fitting Tool can be used to independently support each side of the sash when fitting a top hung window sash in rare circumstances where the horizontal bracing arms of the Sashmate® Top Hung do not lower sufficiently enough to go under the bottom of the sash when the sash has been opened to its maximum. This situation can occur because incorrect hardware was used to install the window, such as the wrong type or position of friction stays. It can also be caused by twisted or collapsed friction stays, which will cause one side of the window to hang lower than the other. This product is an accessory to the Sashmate Window Removal tool (L18701 & L18702).

SASHMATE Top Hung Package Fitting Tools STHPS – STHPS

 1,628.00

The Sashmate Top Hung Package contains the tools required for easy repair and replacement of top hung window sashes. The range is constructed from premium quality zinc plated steel and manufactured in the UK. An added bonus of using Sashmate products is that using extra sets on a repair increases the load capabilities of the sets, So, for example, if 2 Sashmate Top Hung sets are used, this makes double the maximum working load capability. Kit Contents: – 1 x Sashmate Top Hung Steel – 1 x Top Hung Drop Set Steel – 1 x Top Hung Rolling Bar Steel – 1 x Top Hung Storage Bag

SASHMATE Top Hung Rolling Bar Fitting Tool TNRBS – TNRBS

 162.80

The Sashmate Top Hung Rolling Bar Fitting Tool is designed to assist with fitting a top hung window sash, and is an accessory to the Sashmate Window Removal tool (L18701 & L18702). The range is constructed from premium quality zinc plated steel and manufactured in the UK.